Complete Extinguisher Services
Fire extinguishers are your first line of defense against small fires. Guspora provides complete fire extinguisher services including annual inspections, 6-year maintenance, hydrostatic testing, recharging, and new installations.
As a Buckeye Fire Equipment authorized distributor, we stock a complete line of commercial and industrial fire extinguishers. Our factory-trained technicians ensure your extinguishers are ready when you need them most.
Extinguisher inspection workspace
One workspace for the route, the checklist, the evidence, and the report.
- NFPA 10 citations pinned to the jurisdiction-adopted edition.
- Add Equipment supports Extract from Photo — snap the tag, OCR fills make/model/serial.
- Deficiency-to-proposal handoff against the same record set.
Live demo: a real extinguisher inspection captures asset route, checklist state, and evidence rail before the report renders from the same row.
What this means in the field
The technician walks the route, captures evidence on the asset, and the report preview is generated from the same record — without an export or a second tool.
Live demo extinguisher workflow
More extinguisher surfaces.
Inspection list, asset detail, and report preview. Real demo screens; no external delivery or customer send was invoked.
Annual Inspection
Required yearly inspection per NFPA 10 with documentation
6-Year Maintenance
Internal examination and recharge for stored pressure units
Hydrostatic Testing
Pressure testing at 5 or 12 year intervals
Recharging
After use or when pressure is low
OSHA Requirement
Why Choose Guspora?
- Buckeye Fire Equipment authorized distributor
- Factory trained and certified technicians
- Complete inspection documentation
- Barcode tracking available
- Same-day service for most inspections
- Emergency recharge services
- New extinguisher sales and installation
- Training programs available
Service Area Coverage
Our network of licensed service providers covers a wide area. Contact us to confirm availability in your region.
We supply and service all types of fire extinguishers for commercial, industrial, and vehicle applications.
Extinguisher Classifications
| Class | Fire Type | Common Extinguisher Types | Typical Locations |
|---|---|---|---|
| Class A | Ordinary Combustibles (wood, paper, cloth) | Water, ABC Dry Chemical, Wet Chemical | Offices, Schools, Warehouses |
| Class B | Flammable Liquids (gas, oil, grease) | ABC Dry Chemical, BC Dry Chemical, CO2, Clean Agent | Garages, Kitchens, Industrial |
| Class C | Electrical Equipment | ABC Dry Chemical, BC Dry Chemical, CO2, Clean Agent | Server Rooms, Electrical Panels |
| Class D | Combustible Metals | Specialized Dry Powder | Machining, Manufacturing |
| Class K | Cooking Oils & Fats | Wet Chemical | Commercial Kitchens |
ABC Dry Chemical
Multi-purpose extinguisher effective on Class A, B, and C fires. Most common type for general use.
Sizes: 2.5 lb, 5 lb, 10 lb, 20 lb
CO2 (Carbon Dioxide)
Clean agent ideal for electrical fires and sensitive equipment. Leaves no residue.
Sizes: 5 lb, 10 lb, 15 lb, 20 lb
Clean Agent (Halotron)
Environmentally safe, leaves no residue. Ideal for electronics, data centers, and aircraft.
Sizes: 1.4 lb, 2.5 lb, 5 lb, 11 lb, 15.5 lb
Class K Wet Chemical
Specifically designed for commercial kitchen fires involving cooking oils and fats.
Sizes: 1.6 gal, 2.5 gal
Class D Dry Powder
Specialized for combustible metal fires (magnesium, titanium, sodium, lithium).
Sizes: 30 lb
Water Mist
De-ionized water safe for use around electrical equipment. No residue.
Sizes: 2.5 gal
Not Sure What You Need?
Compliance Requirement
Maintenance Schedule
| Interval | Requirements |
|---|---|
| Monthly | Visual inspection by owner/staff: Verify extinguisher is in designated location, no visible damage, pressure gauge in green zone, safety pin and tamper seal intact. |
| Annual | Professional inspection required: Complete examination including weight verification, condition of hose and nozzle, operating instructions legibility, and inspection tag update. |
| 6-Year | Internal maintenance for stored pressure dry chemical and water-type extinguishers: Complete discharge, internal examination, and recharge with new agent. |
| 12-Year | Hydrostatic testing for most extinguisher types. Cylinders are pressure tested to verify structural integrity. Some types require 5-year testing. |
Hydrostatic Test Intervals by Type
| Dry Chemical (stored pressure) | 12 years |
| Dry Chemical (cartridge) | 12 years |
| Water (stored pressure) | 5 years |
| AFFF/FFFP | 5 years |
| CO2 | 5 years |
| Wet Chemical | 5 years |
| Halogenated Agents | 12 years |
| Dry Powder | 12 years |
Annual Inspection Includes:
- Verify location and accessibility
- Check pressure gauge reading
- Examine cylinder for damage or corrosion
- Inspect hose and nozzle condition
- Verify safety pin and tamper seal
- Check operating instructions legibility
- Verify weight (weigh cartridge types)
- Update inspection tag and records
6-Year Maintenance Includes:
- Complete discharge of extinguisher
- Remove valve and internal parts
- Inspect interior for corrosion/damage
- Replace all seals and O-rings
- Replace agent with fresh material
- Recharge to proper pressure
- Apply new 6-year maintenance label
- Update service records
When to Recharge
- After any use, even partial discharge
- When pressure gauge shows low
- After 6-year internal maintenance
- After hydrostatic testing
- If seal or tamper indicator is broken
- After inspection reveals need
- When agent becomes contaminated
- When unit fails weight verification
NFPA 10 Placement Requirements
Fire extinguishers must be located so that the travel distance to reach one does not exceed the maximum specified by NFPA 10. Proper placement ensures quick access during an emergency.
Maximum Travel Distance
| Hazard Class | Max Travel Distance | Typical Locations |
|---|---|---|
| Class A | 75 feet | General office areas, warehouses, schools |
| Class B (light hazard) | 50 feet | Light industrial, retail |
| Class B (ordinary hazard) | 50 feet | Manufacturing, auto repair |
| Class B (extra hazard) | 30 feet | Fuel handling, chemical storage |
| Class C | Based on A or B hazard present | Near electrical equipment |
| Class D | 75 feet | Metal working areas |
| Class K | 30 feet | Commercial kitchens (NFPA 96) |
Mounting Requirements
- Top of extinguisher max 5 ft from floor (≤40 lbs)
- Top of extinguisher max 3.5 ft from floor (>40 lbs)
- Bottom at least 4 inches above floor
- Clearly visible and accessible
- Not blocked by equipment or storage
- Signage if not immediately visible
Location Guidelines
- Near room exits and egress paths
- In high-hazard areas
- Near specific hazard equipment
- Evenly distributed throughout facility
- On each floor in multi-story buildings
- Protected from weather if outdoors
Sizing Requirements
Minimum Ratings by Occupancy
| Occupancy | Class A Rating | Class B Rating | Max Floor Area per Unit |
|---|---|---|---|
| Light Hazard (offices, churches) | 2-A | 10-B | 3,000 sq ft |
| Ordinary Hazard (retail, manufacturing) | 2-A to 4-A | 20-B to 40-B | 1,500-3,000 sq ft |
| Extra Hazard (fuel handling, paint) | 4-A to 6-A | 40-B to 80-B | 1,000-1,500 sq ft |
Free Placement Assessment
Not sure if your extinguisher placement meets code? We offer free assessments to evaluate your current setup and recommend improvements.
Request Assessment